GRAVITY CONVEYORS
Standard widths starting at 12", 18" and 24" overall and 3M and 1.5M lengths. However we will manufacture to your requirements. Our standard conveyor channel is 32x89x32x2.5 thick and is punched at 37.5mm pitch to give spacings of 2" dia rollers starting at 75mm, 112.5mm, 150mm and so on. Three sets of elongated holes are located on the bottom flange of the channel for mounting either SHS or channel stands.
The ends of our frames are fitted with either a hook and bar system or the more popular bolt connectors, which enable you to bolt the lengths together making it more stable.
ROLLER TYPES
The 2 main types are the 'S' and 'PC' types. The 'S' is a 2" diameter galvanised tube 1.6mm think with zinc plated bearings and a 10mm diameter shaft rated at 80kg. We can also use a 3/8" hexagonal and a steel Q shaft in the same bearings. A 7/16" hexagonal is also available.
The 'PC' is a 2" diameter polypropylene tube 4.9mm thick with plastic bearings and a 10mm diameter shaft.
Rollers ranging from 20 mm up to 76 mm in diameter can all be manufactured in house. Plastic and steel wheels can be used to give a 2" diameter but have the ability to overlap where a close pitch is required.
ADJUSTABLE
SUPPORTS
We are able to supply 3 main types of adjustable support.
The Pipe Support is constructed from 25 nominal bore pipe, 50x50x3 angle
iron base with 16 dia solid ties and 20 nominal bore pipe for adjustment.
Thumbscrews are used to lock it at the desired height.
The Channel Support is constructed from 35x50x35x2.5 thick channel, 25x5 flat bar ties, P1000 Unistrut for adjustment. A case hardened locking nut is used to ensure the height does not slip.
The SHS Support is constructed from 50x50x2.5 SHS, 40x40x2 SHS ties and again we use the P1000 Unistrut for adjustment and the case hardened locking nut.
When using the pipe supports the frame sits on top of the pipe adjusters and therefore is easily removed but when using the channel or SHS supports the frame is bolted to the support via a zinc plated bracket for more stability. all 3 types of supports can be bolted to the ground if necessary.
OPTIONAL
EQUIPMENT
45,
90, 180 degree curves and S bends as well as switches for diverting
and converging. Ball transfer units for multidirectional movement, hinge
sections, fixed and bolt on stops and guides as well as all variations
of positive drive and accumulation power conveyors are all available
upon request.
Email: info@bsrconveyors.com.au